Centriforce will continue to support essential industries and critical projects.
Many of our customers operate in the utility and agricultural industries which are absolutely vital, especially at this time. Keeping energy, water and telecoms functioning, and providing food supplies from farm to home respectively.
Therefore, Centriforce is committed to supporting our critical UK and export customers who work to make a difference in combatting this threat to our current and future standing.
As always, we are following government directives and taking all important and necessary measures to support the health and safety of our employees and partners throughout our operation.
Please get in touch with our Customer Service team via firstname.lastname@example.org or speak with our account managers directly.
Our full statement is available here.
We have out together a list of common industry terms which are used across the Centriforce website to help aid your understanding of the products that we have available.
Not only will this help to ensure that you order the right product/s for the projects that you are planning, but it will also give you an insight into the processes that we use in order to fabricate materials from recycled plastics.
|Circular economy||A circular economy is a process aimed to minimise waste through production, maximising the usability of a material and reducing overall waste as a result.
By designing the usage of waste to extend its useful life, Centriforce engages in circular economy practices. We are one of the industry leading companies that use recycled plastic materials, reprocess these into our materials and products which at the end of their own useful life can be reprocessed again into the usage cycle.
Through our operation, we aim to keep as much material as possible within the cycle to reduce waste production – while promoting circular economy practices.
|Post-consumer materials||Recovered materials collected from consumers or the home|
|Recyclable||Products or materials that can be collected and reprocessed as raw materials in the manufacture of new products|
|Waste reduction||An important process which will result in the generation of less waste and/or the product use of materials which would otherwise be added to the waste stream.|
|ENATS 12-23||UK DNO's and electricity utilities have generally adopted Energy Network Association Technical Specification ENA-TS 12-23 to document their technical requirements for cable protection tiles and cable covers used to protect MV HV cables operating at 11kV, 33kV, 66kV and up to 132kV.
Energy Network Association Technical Specification 12-23 has been adopted by UK Distribution Network Operators (DNOS) to determine technical requirements for cable protection tiles and covers when protection MV HV cables, and 11kV, 33kV, 66kV and up to 132kV.
|EN12613||Applied to warning tape and mesh, EN12613 is a standard set by BSI specifying requirements for plastic underground cable and pipeline protection devices.
This specification sets out the dimension, tensile strength, material and visual characteristic requirements for each device when protecting buried utility services.
|Extrusion||Extrusion is a process through which a base material, in our case plastic, is forced along a line through a pre-shaped die to produce the desired product form.
Our extrusion process allows for a range of dimensions within the Centriforce recycled plastics product range.
|HDPE||High-density polyethylene (HDPE) is a strong plastic resin commonly used to make bottles and detergent containers. Standard Code for HDPE is ‘2’|
|LDPE||Low-density polyethylene (LDPE) is a plastic resin commonly used in shopping bags, shrink wrapping and packaging films. Standard code is “4”.|
|Polyethylene terephthalate (PET)||A plastic resin commonly used to make soft drink bottles and other food packaging e.g. trays. Standard code “1”|
|Polyvinyl Chloride (PVC)||Plastic material used to construct piping, food and cosmetic containers. Standard code is “3”.|
|Polypropylene (PP)||Plastic resin that find many everyday applications including tubs, lids and components. Standard code is “5”|
|Polystyrene (PS)||Polystyrene is typically used for toys, CD cases, vending cups, hard packing and packaging. Standard code is “6”|